Differences

This shows you the differences between two versions of the page.

--- cluster:hardware [2022/04/21 19:11] – mcloughlin
+++ cluster:hardware [2023/10/25 04:48] (current) – mcloughlin
@@ Line 1: / Line 1: @@
+===== Usage Notes =====
+Users are allowed to use a max of 75% of RAM on econ8-18.
+Commands to determine hardware info:
+<code>
+lshal | grep system\.hardware
+cat /proc/meminfo
+cat /proc/cpuinfo
+</code>
 ====== Hardware Configuration ======
@@ Line 10: / Line 20: @@
 |econ7|Dell PowerEdge R620|2x Intel Xeon E5-2690|256GB|Storage Node **(do not run code here)**|
 |econ8|Dell PowerEdge R620|2x Intel Xeon E5-2690|256GB|Compute Node|
-|econ9|Dell PowerEdge R620|2x Intel Xeon E5-2680 v2|384GB|Compute Node|
-|econ10|Dell PowerEdge R620|2x Intel Xeon E5-2680 v2|384GB|Compute Node|
 |econ11|Dell PowerEdge R620|2x Intel Xeon E5-2680 v2|384GB|Compute Node|
 |econ12|Dell PowerEdge R620|2x Intel Xeon E5-2680 v2|384GB|Compute Node|
@@ Line 18: / Line 26: @@
 |econ15|Dell PowerEdge R620|2x Intel Xeon E5-2680 v2|384GB|Compute Node|
 |econ16|Dell PowerEdge R620|2x Intel Xeon E5-2680 v2|384GB|Compute Node|
-|econ17|Dell PowerEdge R620|2x Intel Xeon E5-2680 v2|384GB|Compute Node|
-|econ18|Dell PowerEdge R620|2x Intel Xeon E5-2680 v2|384GB|Compute Node|
-===== Usage Notes =====
-Users are allowed to use a max of 75% of RAM on econ8-18.
-Commands to determine hardware info:
-<code>
-lshal | grep system\.hardware
-cat /proc/meminfo
-cat /proc/cpuinfo
-</code>
 ===== Location =====
-The cluster is housed in the University CyberInfrastructure Center (managed by Division of IT).
+The cluster is housed on campus at the colocation facility in AVW (managed by Division of IT).